Welcome, Guest

Main Public Forum

Wanted 2005 KTM 300exc Lighting Capacitor

Buy & Sell

Page:
1
2

TOPIC: Wanted 2005 KTM 300exc Lighting Capacitor

Wanted 2005 KTM 300exc Lighting Capacitor 04 Oct 2015 20:43 #12362

Rudi Offline Expert Boarder Posts: 90	Hey Guys I have a 2005 KTM 300EXC Headlight stopped working so i decided to investigate and found that the lighting capacitor is faulty, so i need a replacement . Can anyone help?
	The administrator has disabled public write access.

Wanted 2005 KTM 300exc Lighting Capacitor 04 Oct 2015 20:51 #12363

Peter R Offline Platinum Boarder Posts: 1016 Thank you received: 47	Find out what the Capacitance is ie : mF Microfarad and the Voltage and see if jaycar can help you. Otherwise order one from Kost Tons Money KTM it's probably Part No: 50311035000
	Last Edit: 04 Oct 2015 20:54 by Peter R. The administrator has disabled public write access.

Wanted 2005 KTM 300exc Lighting Capacitor 04 Oct 2015 21:04 #12364

Rudi Offline Expert Boarder Posts: 90	Thanks Peter 2200 micro farad probably the best option to try Jaycar. KTM want $144.00 Thanks Rudi
	The administrator has disabled public write access.

Wanted 2005 KTM 300exc Lighting Capacitor 04 Oct 2015 21:18 #12365

Tim D Online Administrator Posts: 2564 Thank you received: 272	Rudi, I wouldn't go to JAYCAR, they want $1.85 for one, outrageous! Click on this- JAYCAR
	The administrator has disabled public write access.

Wanted 2005 KTM 300exc Lighting Capacitor 04 Oct 2015 21:51 #12367

Rudi Offline Expert Boarder Posts: 90	Thanks Mr Dykes $1.85 that's a bit over top hey. What is the best way to seal it up as the OEM cap is completely sealed with some kind of resin.
	The administrator has disabled public write access.

Wanted 2005 KTM 300exc Lighting Capacitor 04 Oct 2015 22:22 #12368

Ken R Offline Platinum Boarder RETIRED? Posts: 2961 Thank you received: 137	Something like "liquid nails" might be a good seal, really sticky and tough but does not go brittle. Hard wear stores have small tubes for KTM owners, gotta luv em.
	It's just more time to be flat out! Last Edit: 04 Oct 2015 22:23 by Ken R. The administrator has disabled public write access.

Wanted 2005 KTM 300exc Lighting Capacitor 05 Oct 2015 08:41 #12373

Tim D Online Administrator Posts: 2564 Thank you received: 272	I wouldn't worry about sealing it up too much. i would wrap it up in insulation tape after I'd soldered on some leads. They are well sealed up themselves.
	The administrator has disabled public write access.

Wanted 2005 KTM 300exc Lighting Capacitor 05 Oct 2015 10:00 #12375

Al Offline Platinum Boarder Posts: 1207 Thank you received: 119	After you have soldered your wires, seal the two solder joints with heat shrink. Then seal the hole thing in adhesive heat shrink and seal. Jaycar will have both and you can use the money you saved from buying KTM to do it properly Rude,then you will be ready for racin. Al
	The administrator has disabled public write access.

Wanted 2005 KTM 300exc Lighting Capacitor 05 Oct 2015 16:59 #12383

lefty Offline Platinum Boarder Posts: 421 Thank you received: 51	Hey Rudi, the jaycar ones have low leakage. You'd be happy with that wouldn't ya...
	The administrator has disabled public write access.

Wanted 2005 KTM 300exc Lighting Capacitor 05 Oct 2015 19:02 #12386

Peter R Offline Platinum Boarder Posts: 1016 Thank you received: 47	lefty wrote: Hey Rudi, the jaycar ones have low leakage. You'd be happy with that wouldn't ya... That's a Pisser Lefty !!!
	The administrator has disabled public write access.

Page:
1
2

Main Public Forum

Wanted 2005 KTM 300exc Lighting Capacitor

Time to create page: 0.192 seconds

Copyright amtra.com.au